Re: [DIYbio] Re: At home fabrication of micron scale microfluidics

On 03/01/2015 04:36 PM, Simon Quellen Field wrote:
> Melt some sugar, and pull it into thin threads.
> Build your device by bending and connecting these threads to form the chambers and tubes you wish to have

The nature of sugar taffy is good for smooth flow. There would be much less turbulence than in any planar
photolith process defined digitally -- as in the blu-ray resin catalyzer-on-the-fly machines.

--
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To post to this group, send email to diybio@googlegroups.com.
Visit this group at http://groups.google.com/group/diybio.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/54F3A0D4.3080801%40industromatic.com.
For more options, visit https://groups.google.com/d/optout.