Last time I talked to one of the devs, they would like to get an OT port once they're more widespread. It's not here yet.
-- And yep, that sounds about right for copyright situation. I'd rather write my own software and own it under MIT.
Koeng
On Friday, June 29, 2018 at 2:25:54 PM UTC-7, Cathal Garvey wrote:
On Friday, June 29, 2018 at 2:25:54 PM UTC-7, Cathal Garvey wrote:
It appears that Antha itself is still FLOSS and gratis: https://github.com/antha-lang/antha
However, perhaps this GUI you mention is not FLOSS, and it's possible that they are not releasing device drivers. Because they are the copyright holders of Antha, they can do that even though for someone else it would be a GPL violation. :/
I'd still expect the OpenTrons Antha drivers to be open though, because it's OpenTrons.On 29 June 2018 16:30:45 GMT+01:00, Koeng <koen...@gmail.com> wrote:(actually, if I remember correctly, you have to purchase actual Antha for support of running on the bots? It seemed like it was good for labs doing high throughput work but didn't want to have to think about running robots and developing code)
On Friday, June 29, 2018 at 8:29:08 AM UTC-7, Koeng wrote:Antha is also pretty pricey per year, I think 4 times an OT cost?That said, I met with some developers of Antha and I really like it. Their GUI is really great for management and wonderful for multifactorial optimization. Their data from optimizing GoldenGates was very impressive. It's a piece of proprietary software I would consider purchasing, if I had the money to, since mainly what you're paying for is support and the user interface supporting the bottom-level code. Also, yea it's not really vendor lock-in because it works across many platforms - but python is pretty hard to beat when working with libraries.Here are some videos of our OT1s doing work with our codebase. When in "build-mode" we run about 3 at a time, cloning about 300 plasmids a day.OT doing GoldenGatesOT doing transformationsOT doing plating (from above)OT doing plating (from back)(At the end of this video, you can see how we're doing the serial dilutions. Extremely important to note: you want to slowly dispense the liquid above the plate, creating a small droplet that sticks to the sides of the tip, and THEN move down to drop the droplets while stabbing the agar a little. If you do it when you're already down in the agar, you're gonna have a bad time)Koeng
On Wednesday, June 27, 2018 at 11:30:34 PM UTC-7, Michael Crone wrote:Antha removes the vendor "lock-in" that you are talking about and allows for cross-platform workflows (which becomes useful when you are working in a DNA foundry environment). And when you already have a $30 000 robot it's difficult to justify to your PI to buy a $10 000 one... especially when that robot is already fully equipped with all of the accessories.I completely agree though that the opentrons is great for every day work in the lab and its programmability makes it very attractive.
On Wednesday, 27 June 2018 17:02:22 UTC+2, John Griessen wrote:On 06/27/2018 02:42 AM, Michael Crone wrote:
> We have a Felix in my lab and I'd like to get it up and running because it is easier to justify using that than buying the cheaper opentrons.
What makes it easier to justify? After Koeng's email on how wonderful programmability without vendor lock-in is, I don't get you.
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To post to this group, send email to diybio@googlegroups.com.
Visit this group at https://groups.google.com/group/diybio.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/204cb156-f7c0-4220-a2e7-aa7280d1efc6%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
