The question is how long it takes before failing, and how many amps to gets to before failure. Someone with more knowledge should weigh in on this, but 1A is probably dangerous at 120v. It is tricky to say, because it depends on how you come in contact with it.
Ohms law says that V=IR. You load is the resistance of your gel, which at 120v draws less than 1A. The problem is if you get wet and touch it, and have a lower resistance, and draw more amps. If the chip takes too long to burn out, you are toast.
According to the datasheet the fuse time is about 8.5 ms with a maximum draw of 50A. Ouch. It also looks like it can survive 10 cycles (1/6 sec) at 25A.
Its the amps that kill you, which is why low voltages are generally considered 'safe' - it is hard to draw much current with only 5v of potential.
It is probably fine, but definitely build at your own risk!
--A
On Jul 3, 2013 4:56 PM, "Josiah Zayner" <josiah.zayner@gmail.com> wrote:
-- Cool other people have also thought of this so I know that it should be really usable.
The 120V-> 220V converter is a good idea! Connect that to a higher voltage bridge rectifier and a voltage divider output like 175V run your gels in 20 minutes for like $15 or $20.
Is this still unsafe even with the 1A load limit?
I mean obviously it is unsafe not being enclosed.On Wed, Jul 3, 2013 at 3:45 PM, Patrik D'haeseleer <patrikd@gmail.com> wrote:
Here's an older article that does exactly that: dimmer + fuse + rectifier = 120VDC variable power supply for $20:
http://www.science-projects.com/PowerSupply.htm
![]()
As you mentioned, this is horribly unsafe, but it does work. One upgrade would be to add an isolation transformer. Or better: get a 110->220V travel transformer (or a 220->110V one, and reverse it), so you get isolation from the mains *and* voltages up to 22VDC.
Patrik--To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/709771a7-2cd7-4a2f-bb46-ef79ec3bfb37%40googlegroups.com.
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to a topic in the Google Groups "DIYbio" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/diybio/uNiIyU4xsvA/unsubscribe.
To unsubscribe from this group and all its topics, send an email to diybio+unsubscribe@googlegroups.com.
To post to this group, send email to diybio@googlegroups.com.
Visit this group at http://groups.google.com/group/diybio.
--
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To post to this group, send email to diybio@googlegroups.com.
Visit this group at http://groups.google.com/group/diybio.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/CAEUkM4ue4NeFu6Gdyjd_-iYVcqJtby1EnhZ%3DjVZJqYiQ1G-UzQ%40mail.gmail.com.
For more options, visit https://groups.google.com/groups/opt_out.
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To post to this group, send email to diybio@googlegroups.com.
Visit this group at http://groups.google.com/group/diybio.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/CAL4KOmigMyZzknUVBUouj2gLJ9%2BU%3D0SnJm5LL%3DqnWLB%2BnrgXBQ%40mail.gmail.com.
For more options, visit https://groups.google.com/groups/opt_out.
0 comments:
Post a Comment