Re: [DIYbio] HPLC Designs Utilizing Microbore Tubing

Anyone know offhand of some HPLC designs that utilize microbore tubing?  I've been looking into the concept lately and it seems like using some of the larger (~1mm ID or larger) sizes could be feasible with capillary tubing for the detector and a peristaltic pump to keep it all contained (maybe just using multiple peristaltic pumps to eliminate the need for valves which seem to be very expensive even on places like eBay).  Considering PTFE microbore tubing but might need to go with something else for pump tubing, any suggestions on this topic welcome.

--
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To post to this group, send email to diybio@googlegroups.com.
Visit this group at http://groups.google.com/group/diybio.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/d90a1a5b-83cb-4c28-942f-10fb668fd72b%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.