Hi,
If you still want options, then biomonstaaar is yet another open source bioreactor under construction. See here: http://biomonstaaar.com/
This one is also arduino based, has heating/cooling, bubbles in gas, and reports all sensor data to a webserver so you can check it from home :)
Well... at least it should do most of that by the end of the month, currently its just a bunch of wires, chips and git repos. It even has some funding for equipment, and the full design is not yet finalized, so if you want to take part, you are welcomed to join.
On Saturday, 1 February 2014 18:50:01 UTC+1, Jeff Davies wrote:
-- If you still want options, then biomonstaaar is yet another open source bioreactor under construction. See here: http://biomonstaaar.com/
This one is also arduino based, has heating/cooling, bubbles in gas, and reports all sensor data to a webserver so you can check it from home :)
Well... at least it should do most of that by the end of the month, currently its just a bunch of wires, chips and git repos. It even has some funding for equipment, and the full design is not yet finalized, so if you want to take part, you are welcomed to join.
On Saturday, 1 February 2014 18:50:01 UTC+1, Jeff Davies wrote:
I've written an Android program with 4 levels of user: Engineer, Recipie Manager, Operator and Viewer, in order to operate a Bioreactor.I was growing some control code for a Maximite (australian microcontroller), but realised I needed more power,so bought an Arduino Due (ARM).The status was: GUI basically works.I have played with a $3 bluetooth to serial converter for the maximite, and Atlas scientific pH and DO sensors, and bought an arduino motor controller for impeller and relay board for the valves/feed motors for O2, media, etc.I was thinking of putting this on sourceforge.net as a project - I can do GPL if that's what people want, and then looking for collaborators.Status is currently GUI works. Charting to do (interface defined). Bluetooth to do. Microcontroller code to do (have a demo of this - it's pretty easy really).Idea is to store run data on a SD card near the microcontroller.Anyone interested in collaborating on this project, or know of people working on an equivalent?Jeff Daviesjeff.davies (at) gammasensors.net
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To post to this group, send email to diybio@googlegroups.com.
Visit this group at http://groups.google.com/group/diybio.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/7ab1ac8a-64e2-4a05-a24c-8f6c3ac00ee3%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
0 comments:
Post a Comment