I have the same problem. I was able to remove the circlip and the hexagonle part using the methods described in the group. I thought I would now be able to pull the rotor out, however it still seems to be screwed in sowewhere. Does anybody know the next step? I have attached a picture to show you what my centrifuge looks like now. Any advice would be appreciated.
On Friday, August 19, 2016 at 1:18:51 PM UTC-5, jarlemag wrote:
-- 
On Friday, August 19, 2016 at 1:18:51 PM UTC-5, jarlemag wrote:
I recently bought an Eppendorf 5415D centrifuge, and have tried to remove the rotor for cleaning and inspection. I don't have a rotor key of the kind that is sold by Eppendorf, but the item description at http://www.capitolscientific.com/Eppendorf-022667181-Rotor- seems to indicate it's just a standard 10 mm socket wrench, so I bough one of those. (https://www.amazon.com/gp/Key-for-Microcentrifuge- Models-5415-D-5415-R-10mm- Socket-Wrench product/B0028N57SW ). I attempted to use the socket wrench on the hexagonal part in the centre (see the picture), but that just makes the whole rotor turn. I tried to keep the rotor in place while turning the wrench, but that didn't work either (I couldn't keep the rotor still).If I try to lift the rotor upwards, the centrifuge hangs from it and I'm worried about damagaging it so I didn't try that very hard.The centrifuge manual (http://www.nist.gov/ncnr/upload/Eppendorf_5415R_ ) doesn't go into detail about how to remove the motor. It mentions bending the rotor to one side if it's stuck, but how do I know if it's stuck in the way which is solved by doing that?Centrifuge_Manual.pdf
What do I need to do?Picture of the rotor: https://drive.google.com/file/d/ 0B9aq85qBYTsWZm5tamh0QWRJSFE/ view?usp=sharing Best regards,JP
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To post to this group, send email to diybio@googlegroups.com.
Visit this group at https://groups.google.com/group/diybio.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/7c70f108-0b1e-4c24-8a95-978f3ccbd0ea%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
0 comments:
Post a Comment