Hi Payton,
Hope you've already managed to clear the error - if not, I have a few pointers, and can probably give you more with a little more information.
Let's start with the obvious - have you already power cycled everything? As in, power down the robot, disconnect from circuit, wait to let all caps bleed off, then reconnect and power on.
Next: are there any error messages? If so, can you share screen shots?
Also: if possible, open another method - do you get the same behavior?
Lastly: each of the arms (assuming you have a standard 3-arm config with a RoNa, an MC96 and a LiHa) should be running their own homing routine during initialization - do any of them complete correctly?
Feel free to DM me if you're still stuck.
Cheers,
Rikke
On Mon, Jun 21, 2021, 16:43 Payton Brown <paytonbrown816@gmail.com> wrote:
Hello,I was recently tasked with making a fully automatic worklist maker for the Tecan Freedom Evo I am attempting to test my worklist compatibility and the robot will not initialize out of the blue. It worked perfect last Friday and now it has decided to not work. Whenever I press initialize the robot moves the tips slightly and then the alarm sounds and the initialization fails. None of the tips are stuck any suggestions?-Payton Brown--
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/1740b003-c071-49de-a411-587b23533e30n%40googlegroups.com.
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/CALZhpz%2Bpu9ETnP3Q0ajhzhzu49TDfTubtaF6aeGcec_0v0RoyQ%40mail.gmail.com.
0 comments:
Post a Comment