Hi folks,
The BIO Rad gene Pulser I electroporator arrived from Ebay today.
The BIO Rad gene Pulser I electroporator arrived from Ebay today.
Can someone share a wiring diagram (even if hand drawn) for a setup containing the modules of the BIO RAD Gene Pulser I Electroporator, consisting of
- Gene Pulser (bottom most)
- Pulse Modulator (mid tier)
- Capacitance Extender (top most module)
as shown from 4 annotated pics below of the 4 different sides of the stacked modules, please?
I am not entirely sure how the wires from each module goes to the next one, hence this request and the accompanying pics. Thank you, in advance.
Do I even need the pulse modulator and the capacitance extender, if all that I intend to use this for, is electoporation of E. coli or Agrobacterium?
Cheers,
Tom
PS. You should be able to download and zoom into the pics, if you wish. Or open in a new tab, and expand...
On Tue, Mar 10, 2020 at 2:36 PM Nathan McCorkle <nmz787@gmail.com> wrote:
--Please note that electronic lighter piezoelectric elements can vary significantly in voltage output, by at least 10x depending on a particular given lighter source. It just means you need more testing to classify a piezo element before one of those lighter based circuits will work effectively.
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/CA%2B82U9%2BFEm92UR10_ZoZN6%2BjOj1JnO5-E%2BmdaP8amq9f--Y2bw%40mail.gmail.com.
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/CANpz%3DfGPevFVJkPhS4O%2BEsR2ZXgFgVeWxe4WcHegGELChNRJHA%40mail.gmail.com.
0 comments:
Post a Comment