Re: [DIYbio] Fwd: [atxhs-discuss] Resistor/arduino-based thermocycler

Oh, sorry, I misread.

3 minutes per cycle, got it.

On Tue, Jun 26, 2012 at 12:35 PM, Nathan McCorkle <nmz787@gmail.com> wrote:
> with 3 minutes per 12-40 cycles, thats 15-4.5 seconds per cycle, which
> is unrealistic, since you generally need at least 5-15 seconds just to
> melt the DNA. If this is a capillary setup then maybe I could be lead
> to believe this works, but you'd also need a really high temp ramp
> rate, which all of the biotech industry is shooting for.
>
> I'm not saying this is a bad project, not at all, but your claims must
> be realistic.
>
> On Tue, Jun 26, 2012 at 12:28 PM, Bryan Bishop <kanzure@gmail.com> wrote:
>>
>> From: Matt C.M. <mcmancuso@gmail.com>
>> Date: Tue, Jun 26, 2012 at 11:09 AM
>> Subject: Re: [atxhs-discuss] OpenPCR, we should get one maybe?
>> To: atxhs-discuss@googlegroups.com
>> Cc: Bryan Bishop <kanzure@gmail.com>
>>
>>
>> A member of another hackerspace and I have been diligently working on a
>> resistor based thermocycler that's arduino controlled.  Its in the final
>> stages of testing now, total cost is ~$50-75 depending on the arduino and
>> how fancy you want to get with the details.  It has a wood laser cut box,
>> and the block is milled out of a 1X3X3" block of aluminum, cooling is via a
>> simple PC fan, heating is by resistors powered through an SSR with 120V AC
>> so there's no bulky/expensive power supply needed.  It runs 3 minutes per
>> complete PCR cycle(you usually run 12-40 cycles in a full reaction).  If
>> there's interest I can work on getting another demo model built to show off
>> at our hackerspace.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "DIYbio" group.
>> To post to this group, send email to diybio@googlegroups.com.
>> To unsubscribe from this group, send email to
>> diybio+unsubscribe@googlegroups.com.
>> For more options, visit https://groups.google.com/groups/opt_out.
>>
>>
>
>
>
> --
> Nathan McCorkle
> Rochester Institute of Technology
> College of Science, Biotechnology/Bioinformatics



--
Nathan McCorkle
Rochester Institute of Technology
College of Science, Biotechnology/Bioinformatics

--
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To post to this group, send email to diybio@googlegroups.com.
To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.