Re: [DIYbio] Thermal Cycler Based Bacterial Trasformation

> From: Keoni Gandall
> Sent: 8/20/2013 1:55 PM
> To: Sebastian Cocioba
> Subject: Re: [DIYbio] Thermal Cycler Based Bacterial Trasformation
> The manufacture says the ramp time is .1C to 5C a second, which I have to go
> with 5C since the machine is like almost new

I believe the lower ramp rate (0.1C/sec) is going from Hot to Cold,
while the faster ramp rate (5C/sec) is going from Cold to Hot. You
might re-read the manual to see if that's mentioned somewhere, but if
it's a peltier-based device, that's likely what these two numbers
mean.

--
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To post to this group, send email to diybio@googlegroups.com.
Visit this group at http://groups.google.com/group/diybio.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/CA%2B82U9JpP3P%3DBbXtkKJYrL9uzMJ6gcoycxUuBZQNGvfr3strQQ%40mail.gmail.com.
For more options, visit https://groups.google.com/groups/opt_out.