>component fails or you have some bizarre software bug that will allow the heater to run non-stop.
The circuit is designed to be as secure as possible. And it is getting tested.
E.g. the relais is always of if there's no voltage coming from the chip. Most likely, a software error (never had one in the last years) will cause the chip to restart (heating is off).
What I would always do and recommend to do, of course:
Don't place the incubator on wooden floor or carpets. Use a fire alarm device in the same room.
Don't go out of the house when it's running. Place water near it. (It uses a mobile phone transformator with a long cable, so water would just hit 3Volts DC - absolutely no danger, not 230V AC!
I, too, wouldn't like to use polystyrene because it burns very well once in flames. (but seen it many times on the internet)
Maybe, some shop sells cheap cooling boxes?
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To view this discussion on the web visit https://groups.google.com/d/msg/diybio/-/Q8rh1zf0Af0J.
To post to this group, send email to diybio@googlegroups.com.
To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/diybio?hl=en.
0 comments:
Post a Comment