Hi,
On 20 July 2012 09:52, Meow-Ludo <stuart.mckellar@gmail.com> wrote:
the final assembly should come with a heated lit. From the blog:
"One block is not mentioned and that is the heating cover. The heated cover is a lid that covers the samples and prevents condensation on the vial caps. As the thermal block, the lid has a built-in temperature probe so the regulatory logic can keep it at about 105 degrees. No need for a H-bridge here. A simple mosfet switch will do."
Cheers,
Bastian
-- Looks good. Do you have a heated lid for it? Otherwise you will have to f*** arounf with mineral oil, which would be a pain.
the final assembly should come with a heated lit. From the blog:
"One block is not mentioned and that is the heating cover. The heated cover is a lid that covers the samples and prevents condensation on the vial caps. As the thermal block, the lid has a built-in temperature probe so the regulatory logic can keep it at about 105 degrees. No need for a H-bridge here. A simple mosfet switch will do."
Cheers,
Bastian
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To post to this group, send email to diybio@googlegroups.com.
To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
0 comments:
Post a Comment