Re: [DIYbio] DIY Centrifuge

Perhaps a design I made some time ago can help you get going: https://github.com/PieterVanBoheemen/RWXBioFuge

However, even with small 8 place or 20 place rotors that I 3D printed, I could hear the filament getting loose and flying against the sides. So I would certainly not go for even bigger 3D printed rotors

--
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diybio@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To post to this group, send email to diybio@googlegroups.com.
Visit this group at http://groups.google.com/group/diybio.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/efd9c37e-c7f4-413d-9e51-950c7e4cb124%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.